e-mail: paintingsurfaces@aol.com

Phone: 505.296-3136
FAX: 505.291-8458

2. Brush on 1 heavy coat of the mixture over craft surface.  Let dry.

3. Decorate your craft surface using a coat of acrylics or metallics, or by using a decorative painting technique.  Let dry.

4. Apply 1 thick coat of Mosaic Crackle Activator.  Let dry thoroughly at room temperature.

2. Brush on 1 uneven coat of Mosaic Crackle Medium over all areas to be crackled.  This will result in a variety of sizes of cracks.  Hint: Medium may flow more easily with water added to the brush.

3. Decorate with a coat of acrylics or metallics, or by using a decorative painting technique.  Let dry.

4. Apply 1 thick coat of Mosaic Crackle Activator.  Let dry thoroughly at room temperature.

1. Mix each acrylic color separately with Mosaic Crackle Medium according to Basic Crackling instructions.  Marble as desired.  Let dry.

2. Brush on 1 thick coat of Mosaic Crackle Activator.  Let dry.

2. Brush on Mosaic Crackle Medium to the area to be foiled.  When clear yet tacky, press down foil and rub with tissue to transfer foil, then carefully peel off.

3. To protect the sheen of the foil, apply EN106 Glazing Medium over the foiled surface.  Let dry.

4. Apply 1 thick coat of Mosaic Crackle Activator over foiled surface.  Let dry

5. Antique if desired. (see below).

2. Apply Mosaic Crackling Medium to back of decoupage print, and place onto craft piece.  Apply Mosaic Crackle Medium over top of print, making sure all edges of the print are secure.  Let dry.

3. Apply 1 thick coat of Mosaic Crackle Activator over all areas to be crackled.  Let dry.

4. Antiqued if desired.  (see below).